رد: البطــارية لا تشحــن ؟؟!!!
تنشط مخوخكم حصلت هالرد بالانجليزي لازم تسوي تسجيل البطاريه بال inpa البرنامج مع جهاز والوصلة
You must register the battery to the car – meaning you have to reset the charging algorithms of the car so it is set for a 'new' battery vs your old one. If you don't, the car won't charge it properly and the battery will fail prematurely, perhaps within a year. I believe this is critical, but do what you want – its your money.
You register the battery by going to a local foreign car repair shop, the dealer or your own by using software and the OBD port. Might cost as much as $90 for the dealer to register it, likely less at local shops and probably the lowest cost & easiest way to register it. Takes 2 minutes.
If you want to register it yourself, you have to buy some specialty cables and download the INPA software – total cost for all cables is about $50, but you can use them for other issues if you can get the software running. For laptops made in this decade, you will need a USB to RS232 adaptor (find it on ebay or Amazon and make sure it specifies a Prolific chip, then download this driver prior to plugging it in: http://www.prolific.com.tw/support/f...aller_v130.zip
. Thanks be to Helf745Li and his great INPA posts). The other cable is from the RS232 adaptor to the OBD port on the car (Ebay – China). The software is free online – read the INPA posts on this site to learn about the software and cables. It took me tens tries to get INPA loaded and mostly working, taking at least 8 hours of effort even with years of PC experience. An older laptop might be easier to get it to work (Win95/98). Plus the research time spent here.
As my INPA would only speak German after getting to the sub-menu's, I followed this post's instructions (sorry I don't know your name, but THANKS!!) and it worked perfect.
Procedure to register new battery using INPA:
• Step 1: select BODY from the left hand pop-up menu
• Step 2: select POWER MODULE in the right hand list
• Step 3: select ACTIVATE from the next menu
• Step 4: Select ACTIVATE2 from the next menu
• Step 5: Then select F7 - Register battery replacement in German. Almost instantly you get the message: "Register battery replacement Activated properly." - in German.